Adverts
iPhone charges and won't turn on, what to do? I think you are having a problem with your phone. You're probably trying to turn on your phone, but a screen is black. This is not a very good situation.
A black screen can often be caused by a hardware problem on the iPhone, so it is usually not fixed quickly.
Adverts
In other words, if your iPhone's software isn't working well, the screen may freeze and turn black. So try restarting it..
If the Apple logo appears on the screen, there may not be a problem with the iPhone's hardware – this is a software glitch.
Adverts
However, if everything remains the same, you need to better understand what the cause is.
A logic board It's like your brain. However, every part of your phone is connected to it.
The monitor shows what you see. But the logic board tells you what to show. In fact, your entire iPhone screen is removable, but it's a lot more complicated than you think! There are four main components built into your iPhone's screen.
A touchscreen displays the image you see on your iPhone. The digitizer is the part of the screen that controls touch.
It converts your touch into a digital language that your iPhone can understand.
My iPhone won't turn on and just keeps charging
Frontal camera. Home button. Each iPhone display component has a separate connector that can be connected to the iPhone's logic board.
That's why you can swipe the screen even if the screen is black. The digitizer works, but the LCD does not work. In many cases, the iPhone screen goes black because the cables that connect the LCD to the logic board are not connected.
This cable is called the display data connector. When the data connector disconnects from the logic board, the iPhone can be repaired by connecting.
There is no guarantee, but the general rule is: If your iPhone screen stops working after a crash, the screen may turn black because the LCD cable (display data connector) has disconnected from the logic board.
If your iPhone screen stops working after getting wet, the screen may turn black because the LCD is broken and needs to be replaced.
There are other cases where the fix is not so simple, that is, the LCD itself is damaged. When this happens, it doesn't matter whether the LCD is connected to the logic board or not – it is broken and needs to be replaced.
My iPhone won't turn on and just keeps charging
Hardware damage
One possible cause of black screen of death on iPhone device is hardware failure or damage, which can be caused by accidentally dropping the device or being immersed in water for a long time.
These events may have damaged your iPhone's hardware components, resulting in a black screen and the inability to activate the mobile device.
Software update failed
If you are always careful not to drop your iPhone on the floor or get it wet with water or sweat, the software is probably the cause. If you have recently updated your device but not completed it, this event may have damaged your phone system, causing a black screen issue.
Perform forced reset
Hard restarting your iPhone device can help the internal system to shut down all ongoing processing (including processing that may cause black screen issues) and restart it properly.
To do this, press and hold the “Sleep/Wake” button and “Home” button for a few seconds until the Apple logo appears and restart.
My iPhone won't turn on and just keeps charging
Use iTunes to restore factory settings
If hard reset doesn't work, you need to restore your iPhone device to factory settings.
So, please note that this should be your last choice as this method will erase all current data on your phone.
But so that you don't worry about this, it is highly recommended that you back up your current phone data before proceeding.
However, if you are ready to do this, do the following. Turn on your computer or laptop and make sure you have installed iTunes (if you haven't already, download and install iTunes first; if you don't have a computer to use, you can go to your local Apple Store for help).
When iTunes is installed or launched, connect your iPhone to your computer. And check if the program will detect it by finding the iPhone icon that appears in the top left corner of the menu line.
My iPhone won't turn on and just keeps charging
Click the iPhone icon to view phone settings and detailed information. In the “Summary” panel, find the “Restore iPhone…” button and click it.
A confirmation message will appear, informing you of some reminders before proceeding.
If you are ready to restore your phone to factory default settings, click the “Restore” button. Wait for iTunes to complete the factory reset.
When finished, your phone will automatically restart with the new settings applied by iTunes.
After the phone turns on successfully, you can restore the backup file created before the factory reset recovery procedure.
Therefore, if you have carried out all the procedures and still have a black screen, contact myPhoneup.
If the phone is on but the screen is black, talk to the myPhoneup
Want to stay up to date with the best games and anime. Check out our partner's website Hello Nerd!
Discover our online store, with the best prices! Check it out by clicking here
